single phase to 3 phase converter

Description

▷
Before ordering our DPS, you should check the horsepower(HP) and current(AMPS) of your motor and purchase the suitable our DPS model. And please give us the information of your motor purpose to recommend a suitable DPS model to you. Also, please note the below points carefully. 1. MY-PS-50 model is suitable for 40HP motor.(30KW, 120 amps) 2. DPS should be used for one motor only. 3. The input/output voltage of our DPS is 200v-240v. 4. Our DPS is designed to be suitable for use in motor. 5. The efficiency is around 90%. 6. The voltage of motor should be 200v-240v(Delta wiring). If the voltage of your motor is 380v or 440v, you should change the wire of motor to 200v~240v purpose to connect with output of our DPS. 7. The thickness of wires should be suitable for amperes. 8. Only single phase motor brake is allowed.(Three phase motor brake is not working at our DPS) 9. You could check three phase on the output of DPS when your motor is running. If your motor is not running, you could not check three phase from output of DPS. 10. If your motor has a magnetic starter, or electronic switch, or brake, the operating wires of this device should be connected on “U” and “W” of DPS's output. Thus, if your motor is not running well or the motor is reversing, you should turn off the power immediately and you have to swap the wires on DPS's output(U, V, W). Actually, when you connect the wires from DPS's output to your motor, you could succeed in first time, or second time, or third time. A. Detail information 1. Capacity : Suitable for 40HP motor(30KW, 120 amps) 2. Frequency : 50/60 Hz 3. Dimension(inch) : 5.2x8x13.8(WxLxH) 4. Mounting holes : 6Ø 5. Net Weight : 13.5LB 6. Voltage of input and output : 200V - 240V